Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == vs Rod end igus igubal KCRM-20 internal fine thread M20x1,5 right
Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == and Rod end igus igubal KCRM-20 internal fine thread M20x1,5 right are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == is €4.33 cheaper ($20.88).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == |  Rod end igus igubal KCRM-20 internal fine thread M20x1,5 right |
|---|---|---|
| Price | $20.88cheapest | $25.87 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 27 g | 55 g |
| Bore | 6 mm | 20 mm |
| Center distance to mounting surface | 30 mm | 77 mm |
| Load rating axial static | — | 200 N |
| Load rating radial static | — | 2 275 N |
| Material | Steel / Brass | Plastic |
| Outer diameter | 20 mm | 50 mm |
| Surface | Zinc-plated | Blank |
| Thread pitch | 1 mm | — |
| Thread size | M 6 mm | M 20×1.5 mm |
| Thread type | right | right |
| Tilt angel | 13 ° | 35 ° |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.