Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == vs Rod end igus igubal KCLM-10-F internal fine thread M10x1.25 left
Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == and Rod end igus igubal KCLM-10-F internal fine thread M10x1.25 left are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end igus igubal KCLM-10-F internal fine thread M10x1.25 left is €7.79 cheaper ($11.89).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == |  Rod end igus igubal KCLM-10-F internal fine thread M10x1.25 left |
|---|---|---|
| Price | $20.88 | $11.89cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 27 g | 12.8 g |
| Bore | 6 mm | 10 mm |
| Center distance to mounting surface | 30 mm | 43 mm |
| Load rating axial static | — | 400 N |
| Load rating radial static | — | 1 500 N |
| Material | Steel / Brass | Plastic |
| Outer diameter | 20 mm | 30 mm |
| Surface | Zinc-plated | Blank |
| Thread pitch | 1 mm | — |
| Thread size | M 6 mm | M10x1.25 mm |
| Thread type | right | left |
| Tilt angel | 13 ° | 35 ° |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.