Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == vs Clevis joint DIN 71752 with split pin size 14 x 56 right handed fine thread M14x1,5 steel zinc-plated
Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == and Clevis joint DIN 71752 with split pin size 14 x 56 right handed fine thread M14x1,5 steel zinc-plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Clevis joint DIN 71752 with split pin size 14 x 56 right handed fine thread M14x1,5 steel zinc-plated is €5.35 cheaper ($14.71).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == |  Clevis joint DIN 71752 with split pin size 14 x 56 right handed fine thread M14x1,5 steel zinc-plated |
|---|---|---|
| Price | $20.88 | $14.71cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 27 g | 265 g |
| A | — | 27 mm |
| B | — | 14 mm |
| Bore | 6 mm | — |
| Center distance to mounting surface | 30 mm | — |
| D1 | — | 14 mm |
| D2 | — | M14x1,5 |
| D3 | — | 24 mm |
| Fadmiss | — | 16 560 N |
| G | — | 56 mm |
| L2 | — | 85 mm |
| Material | Steel / Brass | — |
| Outer diameter | 20 mm | — |
| Size | — | 14 x 56 F |
| Surface | Zinc-plated | — |
| Thread pitch | 1 mm | — |
| Thread size | M 6 mm | — |
| Thread slope | — | 1.5 mm |
| Thread type | right | — |
| Tilt angel | 13 ° | — |
| Version | — | fine thread RH |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.