Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == vs Rod end PF short version bore 20mm internal thread M16 right relubricateable
Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == and Rod end PF short version bore 20mm internal thread M16 right relubricateable are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == is €73.05 cheaper ($100.04).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == |  Rod end PF short version bore 20mm internal thread M16 right relubricateable |
|---|---|---|
| Price | $100.04cheapest | $184.35 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 540 g | 223 g |
| Bore | 22 mm | 20 mm |
| Calculation factor | — | 2.34 |
| Center distance to mounting surface | 84 mm | 65 mm |
| Load rating dyn | — | 6.1 kN |
| Material | Steel / Brass | Steel |
| Max speed | — | 850 min-1 |
| Outer diameter | 54 mm | 48 mm |
| Static load rating | — | 3 kN |
| Surface | Zinc-plated | Zinc-plated |
| Thread pitch | 1.5 mm | 2 mm |
| Thread size | M 22×1.5 mm | M 16 mm |
| Thread type | right | right |
| Tilt angel | 15 ° | 6.5 ° |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.