Rod end GS DIN ISO 12240-4 series K internal thread M30x2 right == Initial lubrication required before use == vs Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 left with spherical ball bearing
Rod end GS DIN ISO 12240-4 series K internal thread M30x2 right == Initial lubrication required before use == and Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 left with spherical ball bearing are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 left with spherical ball bearing is €39.48 cheaper ($134.86).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M30x2 right == Initial lubrication required before use == |  Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 left with spherical ball bearing |
|---|---|---|
| Price | $180.43 | $134.86cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 1.13 kg | 241 g |
| Bore | 30 mm | 18 mm |
| Calculation factor | — | 2.21 |
| Center distance to mounting surface | 110 mm | 72 mm |
| Load rating dyn | — | 7.1 kN |
| Material | Steel / Brass | Steel |
| Max speed | — | 900 min-1 |
| Outer diameter | 70 mm | 46 mm |
| Static load rating | — | 2.9 kN |
| Surface | Zinc-plated | Zinc-plated |
| Thread pitch | 2 mm | 1.5 mm |
| Thread size | M 30×2 mm | M 18×1.5 mm |
| Thread type | right | left |
| Tilt angel | 17 ° | 8.5 ° |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.