Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == vs Rod end BR-R DIN 12240-4 series K internal tread M20 left with spherical ball bearing stainless
Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == and Rod end BR-R DIN 12240-4 series K internal tread M20 left with spherical ball bearing stainless are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == is €6.62 cheaper ($211.70).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == |  Rod end BR-R DIN 12240-4 series K internal tread M20 left with spherical ball bearing stainless |
|---|---|---|
| Price | $211.70cheapest | $219.34 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 2.77 kg | 367 g |
| Bore | 40 mm | 20 mm |
| Calculation factor | — | 2.46 |
| Center distance to mounting surface | 142 mm | 77 mm |
| Load rating dyn | — | 5.4 kN |
| Material | Steel / Brass | Stainless steel |
| Max speed | — | 825 min-1 |
| Outer diameter | 90 mm | 50 mm |
| Static load rating | — | 2.3 kN |
| Surface | Zinc-plated | Superfinished |
| Thread pitch | 2 mm | 1.5 mm |
| Thread size | M 42×2 mm | M 20×1.5 mm |
| Thread type | right | left |
| Tilt angel | 16 ° | 7 ° |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.