Rod end GS DIN ISO 12240-4 series K internal thread M5 left == Initial lubrication required before use == vs Clevis joint DIN 71752 with split pin size 12 x 48 right handed fine thread M12x1,25 steel zinc-plated
Rod end GS DIN ISO 12240-4 series K internal thread M5 left == Initial lubrication required before use == and Clevis joint DIN 71752 with split pin size 12 x 48 right handed fine thread M12x1,25 steel zinc-plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Clevis joint DIN 71752 with split pin size 12 x 48 right handed fine thread M12x1,25 steel zinc-plated is €8.82 cheaper ($10.20).
| Criterion |  Rod end GS DIN ISO 12240-4 series K internal thread M5 left == Initial lubrication required before use == |  Clevis joint DIN 71752 with split pin size 12 x 48 right handed fine thread M12x1,25 steel zinc-plated |
|---|---|---|
| Price | $20.38 | $10.20cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 18 g | 180 g |
| A | — | 24 mm |
| B | — | 12 mm |
| Bore | 5 mm | — |
| Center distance to mounting surface | 27 mm | — |
| D1 | — | 12 mm |
| D2 | — | M12x1,25 |
| D3 | — | 20 mm |
| Fadmiss | — | 12 139 N |
| G | — | 48 mm |
| L2 | — | 72 mm |
| Material | Steel / Brass | — |
| Outer diameter | 18 mm | — |
| Size | — | 12 x 48 F |
| Surface | Zinc-plated | — |
| Thread pitch | 0.8 mm | — |
| Thread size | M 5 mm | — |
| Thread slope | — | 1.25 mm |
| Thread type | left | — |
| Tilt angel | 13 ° | — |
| Version | — | fine thread RH |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.