Rod end GS DIN ISO 12240-4 series K external thread M5 left == Initial lubrication required before use == vs Axial joint similar to DIN 71802 size 8 thread M5 RH with nut stainless steel 1.4301
Rod end GS DIN ISO 12240-4 series K external thread M5 left == Initial lubrication required before use == and Axial joint similar to DIN 71802 size 8 thread M5 RH with nut stainless steel 1.4301 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Axial joint similar to DIN 71802 size 8 thread M5 RH with nut stainless steel 1.4301 is €8.06 cheaper ($10.03).
| Criterion |  Rod end GS DIN ISO 12240-4 series K external thread M5 left == Initial lubrication required before use == |  Axial joint similar to DIN 71802 size 8 thread M5 RH with nut stainless steel 1.4301 |
|---|---|---|
| Price | $19.33 | $10.03cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 13 g | 15.2 g |
| Ball diameter | — | 8 mm |
| Bore | 5 mm | — |
| Center distance to mounting surface | 33 mm | — |
| Material | Steel / Brass | Stainless steel (304) |
| Outer diameter | 18 mm | — |
| Pivoting angle | — | 18 ° |
| Pull out force | — | 30 N |
| Surface | Zinc-plated | Blank |
| Thread pitch | 0.8 mm | — |
| Thread size | M 5 mm | M 5 mm |
| Thread type | left | — |
| Tilt angel | 13 ° | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.