Rod end igus igubal KCRM-05 internal thread M5 right vs Clevis joint DIN 71752 with split pin size 10 x 20 right handed fine thread M10x1,25 steel zinc-plated
Rod end igus igubal KCRM-05 internal thread M5 right and Clevis joint DIN 71752 with split pin size 10 x 20 right handed fine thread M10x1,25 steel zinc-plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Clevis joint DIN 71752 with split pin size 10 x 20 right handed fine thread M10x1,25 steel zinc-plated is €3.70 cheaper ($6.18).
| Criterion |  Rod end igus igubal KCRM-05 internal thread M5 right |  Clevis joint DIN 71752 with split pin size 10 x 20 right handed fine thread M10x1,25 steel zinc-plated |
|---|---|---|
| Price | $10.44 | $6.18cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 4 g | 80 g |
| A | — | 20 mm |
| B | — | 10 mm |
| Bore | 5 mm | — |
| Center distance to mounting surface | 27 mm | — |
| D1 | — | 10 mm |
| D2 | — | M10x1,25 |
| D3 | — | 18 mm |
| Fadmiss | — | 10 208 N |
| G | — | 20 mm |
| L2 | — | 40 mm |
| Load rating axial static | 90 N | — |
| Load rating radial static | 600 N | — |
| Material | Plastic | — |
| Outer diameter | 18 mm | — |
| Size | — | 10 x 20 F |
| Surface | Blank | — |
| Thread size | M 5 mm | — |
| Thread slope | — | 1.25 mm |
| Thread type | right | — |
| Tilt angel | 43 ° | — |
| Version | — | fine thread RH |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.