Rod end igus igubal KCRM-08 internal thread M8 right vs Mating piece for clevis joint DIN 71752 size 6 x 12 internal thread M6 steel zinc plated
Rod end igus igubal KCRM-08 internal thread M8 right and Mating piece for clevis joint DIN 71752 size 6 x 12 internal thread M6 steel zinc plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Mating piece for clevis joint DIN 71752 size 6 x 12 internal thread M6 steel zinc plated is €3.05 cheaper ($7.23).
| Criterion |  Rod end igus igubal KCRM-08 internal thread M8 right |  Mating piece for clevis joint DIN 71752 size 6 x 12 internal thread M6 steel zinc plated |
|---|---|---|
| Price | $10.75 | $7.23cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 7.6 g | 21 g |
| Bore | 8 mm | — |
| Center distance to mounting surface | 36 mm | 24 mm |
| Hole diameter for bolts | — | 6 mm |
| Inner width | — | 6 mm |
| Load rating axial static | 250 N | — |
| Load rating radial static | 1 050 N | — |
| Material | Plastic | Steel |
| Outer diameter | 24 mm | — |
| Outer width | — | 12 mm |
| Size | — | 6 x 12 |
| Surface | Blank | Zinc-plated |
| Thread pitch | — | 1 mm |
| Thread size | M 8 mm | M 6 mm |
| Thread type | right | — |
| Thread type gewindeausfuhrung | — | right |
| Tilt angel | 35 ° | — |
| Total length | — | 31 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.