Rod end igus igubal KCRM-10 internal thread M10 right vs Clevis joint DIN 71752 with split pin size 8 x 16 e x ternal thread M8 right handed steel zinc-plated
Rod end igus igubal KCRM-10 internal thread M10 right and Clevis joint DIN 71752 with split pin size 8 x 16 e x ternal thread M8 right handed steel zinc-plated are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Clevis joint DIN 71752 with split pin size 8 x 16 e x ternal thread M8 right handed steel zinc-plated is €2.17 cheaper ($9.33).
| Criterion |  Rod end igus igubal KCRM-10 internal thread M10 right |  Clevis joint DIN 71752 with split pin size 8 x 16 e x ternal thread M8 right handed steel zinc-plated |
|---|---|---|
| Price | $11.83 | $9.33cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 12.8 g | 38 g |
| Bore | 10 mm | — |
| Center distance to mounting surface | 43 mm | — |
| Hole diameter for bolts | — | 8 mm |
| Inner width | — | 8 mm |
| Load rating axial static | 400 N | — |
| Load rating radial static | 1 500 N | — |
| Material | Plastic | Steel |
| Outer diameter | 30 mm | — |
| Outer width | — | 16 mm |
| Pull out force | — | 6 441 N |
| Size | — | 8 x 16 |
| Surface | Blank | Zinc-plated |
| Thread pitch | — | 1.25 mm |
| Thread size | M 10 mm | M 8 mm |
| Thread type | right | right |
| Tilt angel | 35 ° | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.