Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 5mm vs Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 8mm short version
Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 5mm and Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 8mm short version are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 5mm is €7.85 cheaper ($9.44).
| Criterion |  Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 5mm |  Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 8mm short version |
|---|---|---|
| Price | $9.44cheapest | $18.50 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 10 g | 50 g |
| Diameter of mounting holes d1 x d2 x h | — | 3.5 x 6 x 3.1 mm |
| Flange diameter | — | 32 mm |
| Flange width | — | 5 mm |
| For shaft diameter | 5 mm | 8 mm |
| Hole circle diameter of mounting holes | — | 24 mm |
| Length | 22 mm | 25 mm |
| Load rating dynamic | 270 N | 265 N |
| Material | Steel / Plastic | Steel / Plastic |
| Outer diameter | 12 mm | 16 mm |
| Retaining ring | 61 741 200 | — |
| Static load rating | 270 N | 402 N |
| Suitable snap ring din471 | 61 741 200 | — |
| Surface | Blank | Blank |
| Weight retaining ring | 0.5 g | — |
| Wrench size of square | — | 25 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.