Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm vs Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 30h6 x 2000mm long cutting surface marked with yellow paint
Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm and Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 30h6 x 2000mm long cutting surface marked with yellow paint are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm is €328.73 cheaper ($433.95).
| Criterion |  Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm |  Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 30h6 x 2000mm long cutting surface marked with yellow paint |
|---|---|---|
| Price | $433.95cheapest | $813.36 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 1.236 kg | 11.1 kg |
| Depth of hardness min. | — | 0.9 mm |
| For shaft diameter | 25 mm | — |
| Height | 59.5 mm | — |
| Length | 130 mm | 2 000 mm |
| Load rating dynamic | 4 750 N | — |
| Material | Aluminum / Plastic | Stainless steel (440B) |
| Shaft diameter | — | 30 mm |
| Static load rating | 4 150 N | — |
| Surface | Blank | Ground finish |
| Width | 74 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.