Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M6 length 30mm steel strength 5.8 black oxide finished vs Rubber buffer GH ø 25mm height 40mm with through hole 10,5mm
Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M6 length 30mm steel strength 5.8 black oxide finished and Rubber buffer GH ø 25mm height 40mm with through hole 10,5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rubber buffer GH ø 25mm height 40mm with through hole 10,5mm is €0.73 cheaper ($1.94).
| Criterion |  Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M6 length 30mm steel strength 5.8 black oxide finished |  Rubber buffer GH ø 25mm height 40mm with through hole 10,5mm |
|---|---|---|
| Price | $2.79 | $1.94cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 4.9 g | 15 g |
| Height | — | 40 mm |
| Inner diameter | — | 10.5 mm |
| Material | Steel (5.8) | Natural rubber |
| Outer diameter | — | 25 mm |
| Pressure load | — | 500 N |
| Spring range 20 at fzul | — | 10.3 mm |
| Spring rate medium for pressure load | — | 46.3 N/mm |
| Surface | Black oxide finish | Blank |
| Thread size | M 6 mm | — |
| Total length | 30 mm | — |
| Wrench size | 3 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.