Thrust pad DIN 6311 diameter 12mm with snap ring DIN 9045 vs Rubber buffer GH ø 15mm height 20mm with through hole 6,5mm
Thrust pad DIN 6311 diameter 12mm with snap ring DIN 9045 and Rubber buffer GH ø 15mm height 20mm with through hole 6,5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rubber buffer GH ø 15mm height 20mm with through hole 6,5mm is €0.88 cheaper ($1.13).
| Criterion |  Thrust pad DIN 6311 diameter 12mm with snap ring DIN 9045 |  Rubber buffer GH ø 15mm height 20mm with through hole 6,5mm |
|---|---|---|
| Price | $2.15 | $1.13cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 4.4 g | 3 g |
| For bolts gub screws | M 6 DIN6332 | — |
| Height | 7 mm | 20 mm |
| Inner diameter | — | 6.5 mm |
| Material | Steel | Natural rubber |
| Outer diameter | 12 mm | 15 mm |
| Pressure load | — | 160 N |
| Spring range 20 at fzul | — | 4.9 mm |
| Spring rate medium for pressure load | — | 32.7 N/mm |
| Surface | Black oxide finish | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.