Thrust pad DIN 6311 diameter 16mm with snap ring DIN 9045 vs Rubber buffer GH ø 20mm height 20mm with through hole 8,5mm
Thrust pad DIN 6311 diameter 16mm with snap ring DIN 9045 and Rubber buffer GH ø 20mm height 20mm with through hole 8,5mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rubber buffer GH ø 20mm height 20mm with through hole 8,5mm is €0.85 cheaper ($1.24).
| Criterion |  Thrust pad DIN 6311 diameter 16mm with snap ring DIN 9045 |  Rubber buffer GH ø 20mm height 20mm with through hole 8,5mm |
|---|---|---|
| Price | $2.21 | $1.24cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 9 g | 5 g |
| For bolts gub screws | M 8 DIN6332 | — |
| Height | 9 mm | 20 mm |
| Inner diameter | — | 8.5 mm |
| Material | Steel | Natural rubber |
| Outer diameter | 16 mm | 20 mm |
| Pressure load | — | 270 N |
| Spring range 20 at fzul | — | 5.8 mm |
| Spring rate medium for pressure load | — | 46.6 N/mm |
| Surface | Black oxide finish | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.