Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) vs Ball head precision levelling adjuster with locknut MN 686.9 20-6.6 stainless steel 1.4301 (AISI 304)
Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) and Ball head precision levelling adjuster with locknut MN 686.9 20-6.6 stainless steel 1.4301 (AISI 304) are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) is €26.56 cheaper ($65.09).
| Criterion |  Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) |  Ball head precision levelling adjuster with locknut MN 686.9 20-6.6 stainless steel 1.4301 (AISI 304) |
|---|---|---|
| Price | $65.09cheapest | $95.74 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 159 g | 215 g |
| Adjustable range | — | 14 mm |
| Height screwed in | — | 49 mm |
| Inner diameter | — | 6.6 mm |
| Load excl preload | — | 36.56 kN |
| Material | Stainless steel (304) | Stainless steel (304) |
| Max height | — | 63 mm |
| Max load incl preload | — | 43.4 kN |
| Optional screw | — | M 6 |
| Outer diameter | 32 mm | 32 mm |
| Pressure load stat | 16 kN | — |
| Screw in length | 150 mm | — |
| Surface | Blank | Blank |
| Thread length | 145.5 mm | — |
| Thread size | M 10 mm | M 20×1 |
| Tilt angel 945 ca | — | 4 ° |
| Type | — | MN 686.9 20-6.6 |
| Wrench size | 17 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.