Rod end with ball joint for cylinder diameter 80mm thread M20x1,5 vs 2/2 solenoid valve DN 10 port G3/8 230V 50/60Hz
Rod end with ball joint for cylinder diameter 80mm thread M20x1,5 and 2/2 solenoid valve DN 10 port G3/8 230V 50/60Hz are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end with ball joint for cylinder diameter 80mm thread M20x1,5 is €53.63 cheaper ($111.77).
| Criterion |  Rod end with ball joint for cylinder diameter 80mm thread M20x1,5 |  2/2 solenoid valve DN 10 port G3/8 230V 50/60Hz |
|---|---|---|
| Price | $111.77cheapest | $173.67 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Voltage | — | 230 V |
| Weight | 670 g | 500 g |
| Bore diameter | 20 mm | — |
| Connection | — | G 3/8″ |
| Cylinder diameter | 80 mm | — |
| Height | — | 87 mm |
| Kv value base | — | 1.7 m3/h |
| Length | — | 44 mm |
| Material | Steel / Brass | Brass / Plastic |
| Nominal width | — | 10 mm |
| Op pressure max. | — | 10 bar |
| Pivoting angle | 15° ° | — |
| Surface | Zinc-plated | Blank |
| Thread length | 33 mm | 12 mm |
| Thread size | M20x1.50 | — |
| Voltage | — | 230 V 50/60Hz |
| Wrench size | — | 21 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.