DFRobot SER0039 — SERVOMOTOR RC 5V 9G METAL GEAR vs DFRobot FIT0278 — HYBRID STEPPER MOTOR FOR 3D PRIN
DFRobot SER0039 — SERVOMOTOR RC 5V 9G METAL GEAR and DFRobot FIT0278 — HYBRID STEPPER MOTOR FOR 3D PRIN are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, DFRobot SER0039 — SERVOMOTOR RC 5V 9G METAL GEAR is €2.04 cheaper (€5.24).
| Criterion |  DFRobot SER0039 — SERVOMOTOR RC 5V 9G METAL GEAR |  DFRobot FIT0278 — HYBRID STEPPER MOTOR FOR 3D PRIN |
|---|---|---|
| Price | €5.24Best value | €7.28Least favorable value |
| Seller | DigiKey | DigiKey |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | — | 1.7 A |
| Voltage | 5 V | — |
| Weight | 9 g | — |
| Angle de pas | — | 1.8 ° |
| Couple maintien oz in mnm | — | 48,6 / 343,19 |
| Diametre arbre | — | 0,197po (5,00mm) |
| Espacement des orifices de montage | — | 1,220 po (31,00mm) |
| Fonction | Servomoteur, RC (hobby) | — |
| Fonctionnalites | — | Axe rond |
| Longueur arbre et roulement | — | 0,945po (24,00mm) |
| Pas par tour | — | 200 |
| Precision | — | ±5% |
| Resistance de bobine | — | 2 Ohms |
| Style de terminaison | Fil conducteur avec connecteur | Connecteur |
| Taille de chassis nema | — | 17 |
| Taille dimension | Rectangulaire - 0,472po x 0,906po (12,00mm x 23,00mm) | Carré - 1,654po x 1,654po (42,00mm x 42,00mm) |
| Temperature de fonctionnement | — | -20°C ~ 50°C |
| Tension nominale | 5V CC | 3,4V CC |
| Type | Moteur CC | Hybride |
| Type de bobine | — | Bipolaire |
| Type de moteur | Rotation positionnelle | — |
| Moisture sensitivity (MSL) | 1 (illimité) | 1 (illimité) |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.