Pololu 2201 — SERVOMOTOR RC 4.8V MICRO METAL vs Portescap 26M048D1U — STEPPER MOTOR PM UNIPOLAR 5V
Pololu 2201 — SERVOMOTOR RC 4.8V MICRO METAL and Portescap 26M048D1U — STEPPER MOTOR PM UNIPOLAR 5V are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Pololu 2201 — SERVOMOTOR RC 4.8V MICRO METAL is €15.46 cheaper (€21.36).
| Criterion |  Pololu 2201 — SERVOMOTOR RC 4.8V MICRO METAL |  Portescap 26M048D1U — STEPPER MOTOR PM UNIPOLAR 5V |
|---|---|---|
| Price | €21.36Best value | €36.82Least favorable value |
| Seller | DigiKey | DigiKey |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | — | 0.26 A |
| Voltage | 6 V | 5 V |
| Speed | 1 300 rpm | — |
| Angle de pas | — | 7.5 ° |
| Couple maintien oz in mnm | — | 1,6 / 11,3 |
| Diametre arbre | 0,118 po (3,00mm) | 0,079po (2,00mm) |
| Espacement des orifices de montage | — | 1,370po (34,90mm) |
| Fonction | Motoréducteur | — |
| Fonctionnalites | Arbre de moteur étendu - Compatibilité codeur | Axe rond |
| Longueur arbre et roulement | 0,354po (9,00mm) | 0,445 po (11,30mm) |
| Pas par tour | — | 48 |
| Precision | — | ±15% |
| Puissance nominale | 0.37 W | — |
| Rapport de demultiplication | 9.96 | — |
| Resistance de bobine | — | 19.6 Ohms |
| Style de terminaison | Patte à braser | Fils conducteurs |
| Taille dimension | Rectangulaire - 0,394po x 0,472po (10,00mm x 12,00mm) | Rond - 1,030po de diamètre (26,16mm) |
| Temperature de fonctionnement | — | -20°C ~ 70°C |
| Tension nominale | — | 5V CC |
| Type | Moteur CC | Aimant permanent |
| Type de bobine | — | Unipolaire |
| Type de moteur | À balais | — |
| Moisture sensitivity (MSL) | Sans objet | Sans objet |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.