Raspberry Pi SC0480 — COMPUTE MODULE CM4 ANTENNA KIT vs Espressif Systems ESP32-C3-WROOM-02-N4 — RF TXRX MOD BT WIFI PCB TH SMD
Raspberry Pi SC0480 — COMPUTE MODULE CM4 ANTENNA KIT and Espressif Systems ESP32-C3-WROOM-02-N4 — RF TXRX MOD BT WIFI PCB TH SMD are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Espressif Systems ESP32-C3-WROOM-02-N4 — RF TXRX MOD BT WIFI PCB TH SMD is €1.41 cheaper (€2.96).
| Criterion |  Raspberry Pi SC0480 — COMPUTE MODULE CM4 ANTENNA KIT |  Espressif Systems ESP32-C3-WROOM-02-N4 — RF TXRX MOD BT WIFI PCB TH SMD |
|---|---|---|
| Price | €4.37 | €2.96cheapest |
| Seller | DigiKey | DigiKey |
| Availability | In stock | In stock |
| Rating | — | — |
| Frequency | — | 2 400 000 000 Hz |
| Boitier | — | Module 19-SMD |
| Circuit integre composant utilise | — | ESP32-C3 |
| Courant reception | — | 82mA ~ 84mA |
| Courant transmission | — | 280mA ~ 345mA |
| Debit de donnees | — | 150 Mbps |
| Fonctionnalites | Câble - 205mm | — |
| Frequence centre bande | 2,45GHz, 5,45GHz | — |
| Gain | 2 dBi | — |
| Groupe de frequences | UHF (2GHz ~ 3GHz), SHF (f > 4GHz) | — |
| Hauteur max. | 4,252 po (108,00mm) | — |
| Interfaces serie | — | GPIO, I2C, I2S, SPI, JTAG, UART, USB |
| Nombre d anneaux | 2 | — |
| Norme gamme rf | — | Bluetooth, WiFi |
| Plage de frequences | 2,4GHz ~ 2,5GHz, 5,1GHz ~ 5,8GHz | — |
| Programmable digikey | — | Non vérifié |
| Protocole | — | 802.11b/g/n, Bluetooth v5.0 |
| Puissance max. | 10 W | — |
| Puissance sortie | — | 20.5 dBm |
| Ros | 2 | — |
| Sensibilite | — | -105 dBm |
| Taille memoire | — | 4Mo Flash, 400Ko SRAM, 384Ko ROM |
| Temperature de fonctionnement | — | -40°C ~ 85°C (TA) |
| Tension alimentation | — | 3V ~ 3,6V |
| Terminaison | SMA femelle | — |
| Type d antenne | Fouet, inclinaison | Trace carte CI |
| Type de montage | Vis | Montage en surface |
| Moisture sensitivity (MSL) | Sans objet | 3 (168 heures) |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.