racedayquadsHAPPYMODEL· Commande de moteurs
Happymodel Crazybee V1.0 5-in-1 AIO - G473 FC + 5A 1S Bluejay ESC + ELRS RX
Réf. fabricant G24058CN1Z
89.24 $
Réf. fabricant G24058CN1Z
Vendu par racedayquads à 77.34 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 110.81 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 77.34 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 18.47 € |
| Total livré | 110.81 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 5 A |
| Poids | 18 g |
The Happymodel Crazybee V1.0 5-in-1 AIO is the first 5-in-1 board based on the G473 MCU platform from Happymodel. It combines a flight controller, ESCs, ELRS receiver, video transmitter, and OSD chip for analog video into a compact unit ideal for small 65 mm 1S FPV drones. Browse the rest of our Whoop AIO boards and all our Happymodel products! Features Built-in UART ELRS 2.4GHz receiver OpenVTX video transmission supports 48 channels in the 5.8GHz band Lightweight & compact build Specifications Flight Controller MCU: STM32G473CEU6 Gyro: ICM42688P Blackbox memory: 16MB Sensor: Voltage & current BEC: 5V, Max. 2A UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX) BetaFlight OSD: AT7456E RX: Serial ELRS 2.4GHz Receiver firmware target: HappyModel EP1/EP2 2.4GHz RX FC firmware target: CRAZYBEEG473 USB port: SH1.0-4Pin Battery connector: A30 Mounting pattern: 25.5mm x 25.5mm Weight: 3.8g (without pigtail and vtx antenna) ESC Power input: 1S only Current: 5A continuous, 6A peak ESC firmware: V0.21.hex Bluejay Firmware target: A_X_5_96KHz Digital signal protocol: DShot300, DShot600 VTX OPENVTX: 5.8GHz 48 channels, Max. 400mW Output power: PIT/10/25/100/400 Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio2.1 Modulation type: FM Operating temperature: -10℃ ~ 80℃ Antenna port: IPEX1/U.FL Receiver Serial ExpressLRS 2.4GHz Antenna: Enameled copper wire 31mm length Firmware target: HappyModel EP1/EP2 2.4GHz RX Telemetry output Power: <12dBm ExpressLRS firmware version 3.0.1 Support flash firmware by WIFI Links Firmware download CRAZYG473 4.6.0 betaflight firmware Default factory dump file Dump file for CRAZYG473 Betaflight4.6.0 Includes 1x Happymodel Crazybee V1.0 5-in-1 AIO 1x A30 connector with cable 1x External USB connector 1x 5.8GHz linear antenna 1x Set of screws 1x Set of soft mounts
