racedayquadsHAPPYMODEL· Motor control
Happymodel Crazybee V1.0 5-in-1 AIO - G473 FC + 5A 1S Bluejay ESC + ELRS RX
Manufacturer part no. G24058CN1Z
$89.24≈ 77.34 €
Price summary
Listed by racedayquads at €77.34. Delivered to France, including shipping, VAT and any customs duty, it comes to about €110.81. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €77.34 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €18.47 |
| Total delivered | €110.81 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Current | 5 A |
Mechanical
| Weight | 18 g |
Description
The Happymodel Crazybee V1.0 5-in-1 AIO is the first 5-in-1 board based on the G473 MCU platform from Happymodel. It combines a flight controller, ESCs, ELRS receiver, video transmitter, and OSD chip for analog video into a compact unit ideal for small 65 mm 1S FPV drones. Browse the rest of our Whoop AIO boards and all our Happymodel products! Features Built-in UART ELRS 2.4GHz receiver OpenVTX video transmission supports 48 channels in the 5.8GHz band Lightweight & compact build Specifications Flight Controller MCU: STM32G473CEU6 Gyro: ICM42688P Blackbox memory: 16MB Sensor: Voltage & current BEC: 5V, Max. 2A UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX) BetaFlight OSD: AT7456E RX: Serial ELRS 2.4GHz Receiver firmware target: HappyModel EP1/EP2 2.4GHz RX FC firmware target: CRAZYBEEG473 USB port: SH1.0-4Pin Battery connector: A30 Mounting pattern: 25.5mm x 25.5mm Weight: 3.8g (without pigtail and vtx antenna) ESC Power input: 1S only Current: 5A continuous, 6A peak ESC firmware: V0.21.hex Bluejay Firmware target: A_X_5_96KHz Digital signal protocol: DShot300, DShot600 VTX OPENVTX: 5.8GHz 48 channels, Max. 400mW Output power: PIT/10/25/100/400 Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio2.1 Modulation type: FM Operating temperature: -10℃ ~ 80℃ Antenna port: IPEX1/U.FL Receiver Serial ExpressLRS 2.4GHz Antenna: Enameled copper wire 31mm length Firmware target: HappyModel EP1/EP2 2.4GHz RX Telemetry output Power: <12dBm ExpressLRS firmware version 3.0.1 Support flash firmware by WIFI Links Firmware download CRAZYG473 4.6.0 betaflight firmware Default factory dump file Dump file for CRAZYG473 Betaflight4.6.0 Includes 1x Happymodel Crazybee V1.0 5-in-1 AIO 1x A30 connector with cable 1x External USB connector 1x 5.8GHz linear antenna 1x Set of screws 1x Set of soft mounts
Similar products
racedayquadsIn stock
HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
€80.43$92.81
View at seller ↗
racedayquadsIn stock
HappyModel 1S F4 AIO Toothpick/Whoop Flight Controller w/ 5A 8bit 4in1 ESC & 200mW VTX - ELRS 2.4GHz SPI
€86.62$99.95
View at seller ↗
racedayquadsIn stock
EMAX Tinyhawk 3 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX
€111.37$128.51
View at seller ↗
racedayquadsIn stock
iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX
€86.62$99.95
View at seller ↗
