racedayquadsTBS· Commande de moteurs
TBS Lucid Wing AIO - H7 FC + 50A 2-6S AM32 ESC
Réf. fabricant 23735
91.62 $≈ 79.40 €
Le prix en résumé
Vendu par racedayquads à 79.40 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 113.28 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 79.40 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 18.88 € |
| Total livré | 113.28 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 50 A |
Mécanique
| Poids | 64 g |
Description
The TBS Lucid Wing AIO - H7 FC + 50A 2-6S AM32 ESC is your quick plug & play wing FC for big wings! Flying wings up to 1m wingspan, or approximately 1.5kg of takeoff weight. Running the STM32H7 chip, a custom AM32 50A ESC in a sleek, heat-dissipating plastic case with plug connectors for peripherals such as servos, VTX, Camera, GPS and external USB. Designed for both seasoned pros and enthusiastic newcomers, this flight controller takes the chore out of building your FPV setup and gets you up and running quicker and easier. Browse the rest of our Wing Gear as well as our TBS Products! Features All-in-One Wing Solution Plug & Play Connectors Powerful H743 Processor Dual Gyro System. 50A AM32 ESC Specifications MCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash Gyro: ICM42688 x 2 (duo gyro) OSD Chip: AT7456E (SPI2) Barometer: Infineon DPS310 connected via I2C2 PWM Outputs: 6 channels external, 1 internal for ESC Blackbox (BB): Data logging equipped with a MicroSD card slot (SDIO) UARTs: 5 ext, 2 int] UART1(RX only)/UART2/UART3/UART4/UART6/UART7(RX only, internal ESC)/UART8 (internal pads) I2C Buses: 2 (1x GPS, 1x barometer - internal) CAN Bus: 1x Analog Inputs: 2 ADC internal channels (VBAT, Current). LED Indicators: 3 LEDs (not visible) USB Interface: Type-C connector (USB 2.0 standard) JST Connectors: 1x JST-SH1.0 4-pin (Receiver) 3x JST-SH1.0 6-pin (USB extender, GPS, VTX) 1x JST-GH1.25 4-pin (CAN bus) Power Control: Switch for filtered 5V/6.2V/7V/8.4V servo output power DJI FPV OSD: Compatible via spare UART port Power Specifications Input Voltage: 6 - 26V (2 to 6S LiPo). BEC #1: 5V/6V/7.2V 5A (Servos, digital VTX, analog VTX, analog camera) BEC #2: 5V 1A (Receiver, GPS, CAN bus) Battery voltage sensor: 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot) Current sense ADC: 3.2V @ 160A Power Consumption: 200mA @ 5V with Betaflight, 150mA @ 5V with ArduPilot. Important Note: The DJI Switch will only output vbat. Contact TBS support for instru
Produits similaires
racedayquadsEn stock
HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
80.43 €92.81 $
Voir chez le vendeur ↗
racedayquadsEn stock
HappyModel 1S F4 AIO Toothpick/Whoop Flight Controller w/ 5A 8bit 4in1 ESC & 200mW VTX - ELRS 2.4GHz SPI
86.62 €99.95 $
Voir chez le vendeur ↗
racedayquadsEn stock
EMAX Tinyhawk 3 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX
111.37 €128.51 $
Voir chez le vendeur ↗
racedayquadsEn stock
iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX
86.62 €99.95 $
Voir chez le vendeur ↗
