
Manufacturer part no. 21100025
Listed by Hiwonder at €15.59. Delivered to France, including shipping, VAT and any customs duty, it comes to about €48.71. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €15.59 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €8.12 |
| Total delivered | €48.71 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 100 g |
Feature Support temperature, voltage and position feedback Provide 51, Arduino, STM32, Raspberry Pi source code Three connectors for easy wiring Working modes are servo mode and deceleration motor mode Weight 58g Size 40x20x40.5mm Working voltage 6-8.4V Speed 0.16sec/60° 7.4V Torque 17kg.cm 7.4V Rotation 0-240° No-load current 100mA Stall Current 2.4-3A Servo accuracy 0.3° Control method UART serial command Communication baud rate 115200 Storage Save data when the power off Servo ID 0-253 for user setting,ID 1is default Angel read back function Support Protection Avoid stalling and overheat Data feedback Temperature, Voltage, Position Working mode Servo mode and deceleration motor mode Control angle range 0-1000, correspond to 0-240 Wire 200mm Gear Brass gear Clean Wiring There are 3 ports for you to connect which makes the project have clean wiring and beautiful outlook. Servo Debugging System In Debugging system, you can set ID number, working mode, rotation speed, position deviation, LED light, temperature alarm and voltage alarm for servos. Packing List 1* HTS-25L serial bus servo 1* servo horn kit Specifications Item Specification Weight 58g Size 40x20x40.5mm Working voltage 6-8.4V Speed 0.16sec/60° 7.4V Torque 17kg.cm 7.4V Rotation 0-240° No-load current 100mA Stall Current 2.4-3A Servo accuracy 0.3° Control method UART serial command Communication baud rate 115200 Storage Save data when the power off Servo ID 0-253 for user setting,ID 1is default Angel read back function Support Protection Avoid stalling and overheat Data feedback Temperature, Voltage, Position Working mode Servo mode and deceleration motor mode Control angle range 0-1000, correspond to 0-240 Wire 200mm Gear Brass gear



