52pi52Pi· Displays & interfaces
52Pi OLED Display Module I2C IIC 128X64 Pixel 0.96 Inch Display Module Yellow Blue Two-Color Display Compatible with Raspberry Pi Arduino 51 Series MCU STM32 R3 and Mega
Manufacturer part no.
Manufacturer part no.
Listed by 52pi at €4.41. Delivered to France, including shipping, VAT and any customs duty, it comes to about €23.29. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €4.41 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.88 |
| Total delivered | €23.29 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 50 g |
[Description] This OLED display module is small, only 0.96" diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip. It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness. The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C. That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. [Features] Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Super high brightness and contrast are adjustable With embedded driver/controller Interface type is IIC Pin Definition: GND, VCC ,SCL, SDA Pins: 4 pins Voltage: 3.3V DC Working Temperature: -30 ° ~ 70 ° Drive Duty: 1/64 Duty High resolution: 128 * 64inch(approx) Driver IC: SSD1306 Display：Yellow /Blue [Package Includes] 1 set： 1 x 0.96 inch OLED Display kit 2 sets： 2 x 0.96 inch OLED Display kit 5 sets： 5 x 0.96 inch OLED Display kit [52Pi WiKi] S-0018 - 52Pi Wiki
