racedayquadsGEPRC· Motor control
GEPRC Taker F405 BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 50A 4in1 ESC)
Manufacturer part no. 21406
$83.29≈ 72.18 €
Manufacturer part no. 21406
Listed by racedayquads at €72.18. Delivered to France, including shipping, VAT and any customs duty, it comes to about €104.62. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €72.18 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €17.44 |
| Total delivered | €104.62 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 50 A |
| Weight | 95 g |
Introducing GEPRC's take on the best budget stack out there on the market! GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. With the STM32F405 chip, ICM42688-P gyroscope, 16M black box and GEP-BLS50A-4IN1 ESC, you can enjoy a smooth and effortless user experience. This stack system connects to the DJI Air Unit with no soldering required, plus the upgraded Type-C USB connector increases the lifespan of the socket and reduces the risk of poor contact. The 9V 2.5A + 5V 3A dual independent BEC ensures a reliable power supply for any external device you might need. Check out all our 30x30 stacks & combos, as well as the rest of our GEPRC selection. Features Use mainstream STM32F405 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With GEP-BLS50A-4IN1 ESC, the flying feel is silky A simple and reasonable installation method, the shock absorber can make the gyroscope work very stably 9V 2.5A + 5V 3A dual independent BEC Specifications GEP-F405-HD V2 Flight Controller MCU: STM32F405 IMU: ICM42688-P(SPI) Air Unit Connection: Direct plugging into DJI Air Unit Black Box: 16M onboard USB Connector: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V,9V dual BEC Firmware Target: GEPRCF405 Size: 36.8×36.8mm, hole 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage: 3-6S LiPo UART: 6 Power Filter: Integrated LC filter Weight: 7.7g GEP-BLS50A-4IN1 ESC Input Voltage: 3-6S Lipo Galvanometer: Support Continuous Current: 50A Burst Current: 55A（5s） Support Protocol: Oneshot125/Oneshot42/Mulishot modes/Dshot 150/300/600 Size: 42.9×39.7mm, hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle. Weight:13.7g Target: G_H_30 Includes 1x Flight Controller 1x ESC 1x Capacitor 1x DJI Air Unit Adapter Cable 1x Flight Controller Adapter Cable 1x XT60 Power cable 4x
