racedayquadsROTOR VILLAGE· Robots & kits
RVS Creamer 2 5" Frame Kit
Manufacturer part no. RVS-CREAMER2
$99.95≈ 86.62 €
Price summary
Listed by racedayquads at €86.62. Delivered to France, including shipping, VAT and any customs duty, it comes to about €121.94. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €86.62 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €20.32 |
| Total delivered | €121.94 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 168 g |
Description
The Creamer is back and better then ever! - Introducing the Creamer 2! - Designed to shed excess weight and bulk but yet be robust enough for the abuse we all put our freestyle frames through. The dual stack mounts allow a versatile and clean build, as do the buzzer and RX pockets in the baseplate. Be sure to check out all our 5" frames, and all our RotorVillage RVS Products Features DJI cam to Micro cam ready (19mm width) Chamfered edges for days! Dual Stack setup 30.5mm (single) 20x20mm (front & rear) AIO Mounting (single) Rigid true-X air-frame Extra carbon rails at the front allow it shake off the gnarliest of crashes. Light weight Super Low Profile / Low CG Dual top mount battery straps (cause I hate loosing lipos!) Removable easy swap arms - remove 1 bolt, loosen 1 bolt Bling bling gold-coloured hardware XT60 passthrough in the top plate DJI O3 compatible (only with M1.6x8mm cap head screws for vista/O3) 3D PARTS ON THINGIVERSE https://www.thingiverse.com/rotorvillage/designs Specification Wheelbase: 5-5.5": 252mm Carbon Fiber Thickness(Base): 2.5mm Carbon Fiber Thickness(Mid): 2.5mm Carbon Fiber Thickness(Top-plate): 2.5mm Carbon Fiber Thickness(Arms): 6mm Camera: 19-20mm Camera widths Camera Skirt: 5mm Weight: 114.5g (this includes the TPU parts) Stack mount: 20x20 or 30.5x30.5 Motor mount pattern: 16x16mm ONLY Includes RVS Creamer 2 5" Frame Kit 16x Motor Mount Screws 2x LiPo straps 1x TPU Mount kit (FPV cam mounts x2, Immortal-T Mount, SMA antenna mount) 1x Hardware Kit
