racedayquadsFlycolor· Motor control
Flycolor Trinx G5 32Bit 45A 3-6S 30x30 4in1 ESC
Manufacturer part no. FLYC-W4-FW045006
$95.78≈ 83.01 €
Price summary
Listed by racedayquads at €83.01. Delivered to France, including shipping, VAT and any customs duty, it comes to about €117.61. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €83.01 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €19.60 |
| Total delivered | €117.61 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Current | 45 A |
Mechanical
| Weight | 59 g |
Description
Check out the Flycolor Trinx G5 45A 4-in-1 ESC, as the Flycolor X-Cross Series ESC’s are on a fast rise to the top. With 45A of continuous current support, you will have plenty of headroom to push your rig to the limit. When you see this Trinx G5, you should think about dependability and power. Let this be your next choice for your 30x30 spot on your next big build. With the high powered MCU and Raptor 5 firmware, this is path towards the next level for your builds! Check out all our 4in1 ESCs, all our 30x30 ESCs, and all our Flycolor Products! Features ARM 32-bit Cortex MCU STM32G071, with a frequency up to 64 MHZ, where that's 25% higher than the previous generation of MCU. PWM frequency up to 128K, high frequency for higher throttle makes running smoother. Multiple Protocols, where all Dshot and Proshot signals are supportedSupports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multshot. 4in1 ESC built-in current sensor and VBAT output. Aluminum heat sink, with a large surface area of aluminum heat sink can effectively slow down the temperature rise, hence giving longer and better performance when pushing your quad. Damping design, hence reducing the effect of vibration on the flight controller.Supports higher power load, more suitable for violent flight or racing drone. Specifications MCU:STM32G071 LiPo Power input: 3-6S Cont.Current: 45A Burst Current: 55(10s) BEC: No Weight: 19.6g (with heat sink) Dimensions: 45x41x8.3mm Mounting holes: 30.5x30.5mm (M3) Throttle Calibration: Supported ESC Programming: BLHeliSuite32 Application: 170-450 Multi Firmware: Flycolor_Raptor_5 Includes Flycolor Trinx G5 32bit 45A 3-6S 30x30 4in1 ESC 4x Silicone Vibration absorber 5x O-Ring 1x Power Cable with XT60 1x FC/ESC connector wire 1x Low ESR Capacitor 1x Heat sink User Manual
