Manufacturer part no. 13320
Listed by racedayquads at €107.76. Delivered to France, including shipping, VAT and any customs duty, it comes to about €147.31. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €107.76 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €24.55 |
| Total delivered | €147.31 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 35 A |
| Weight | 18 g |
The FETtec 35 amp 4in1 ESCs is a great board on its own, now the magic comes from KISS FC Passthrough and other KISS Features. For example Dshot2400, 128kHz motor PWM, Dshot 300-2400, and 128kHz motor PWM. As being version 1.1 they fixed issues like not having to install a capacitor close to the mounting holes. You will see an increased area around the battery soldering pads for safer use. Also adding a new protection circuit for the signal IOs to the board. One blue LED for each ESC onboard, grab this 20x20 board for those quads that need them! The perfect compliment to your FETtec Kiss FC! Check out all our KISS compatible gear, and everything FETtec! Features More space around battery pads One blue LED for each ESC onboard New protection circuit for the signal IOs No more capacitors close to the mounting holes Specifications Active current limiting @ 35A Input voltage: 3S-6S High quality 40V MOSFETs STM32G071 @ 64MHz 128 kHz motor PWM Weight: 6.4g(board only) Full sine wave control Solder points for up to 5 additional capacitors KISS FC Passthrough Betaflight pass-through (available from 4.1) Automatic input signal detection: Dshot 300-2400 PWM OneShot42 / 125 OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry) New FETtec Firmware FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin Dimensions: 30mm x 35mm Mounting hole: 20mm x 20mm, M2 breakable for M3 Manual Download FETtec Configurator Includes 1x FETtec 35A V1.1 3-6S 20x20 4in1 ESC 1x Capacitor 50V, ESR < 1ohm (477CKE050M) 1x JST-SH 8 Pin Cable
