racedayquadsSKYSTARSRC· Motor control
SkyStarsRC Fly Stack F7 HD Pro 3 3-6S 30x30 Stack/Combo (F722 FC / KO45 32Bit 45A 4in1 ESC)
Manufacturer part no. 19929
Manufacturer part no. 19929
Listed by racedayquads at €122.71. Delivered to France, including shipping, VAT and any customs duty, it comes to about €165.25. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €122.71 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €27.54 |
| Total delivered | €165.25 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 45 A |
| Weight | 73 g |
The SkyStars Fly Stack features an F722 HD Pro 3 flight controller and a KO45 45A BLHeli_32 4-in-1 128K ESC with a 30x30 mounting pattern! Features The ESC has an onboard filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components. Built-in inverter, which can actually be installed in any spare UART. EMI Shell provides a stronger anti-interference capability. DJI FPV OSD is supported by any spare UART VTX 10V/Vbat filtered power ON/OFF switch Flight control onboard voltage sensor F722 HD Pro 3 Flight Controller 30x30 Mounting Pattern KO45 45A 128K ESC 3-6S LiPo Support Specifications F722 HD PRO 3 OSD FC Receiver: Support Sbus, CRSF, IBUS, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a Installation size: 30.5x30.5mm (The installation hole is M4 and supports shock column installation) BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI LED: 4 LED independent pads, support WS2812 programming lamp output. 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr) LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) :3 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V) OSD: Betaflight SPI OSD DJI HD OSD(UART6) BetaFlight firmware: SKYSTARSF722Pro INAV firmware: SKYSTARSF722HD MCU: STM32F722RGT6 216MHz External size: 39x39mm 6x Uarts: UART 1/2/3/4/5/6 USB Type: Type-C (USB2.0) Flight control weight: 6.9g LDO 3.3V: Max.250mA Barometer :Bmp280 Input voltage: 3-6S Gyroscope: BMI270 Black box: 16MB PWM outputs: 4 I2C: 1 KO45 45A 4in1 ESC Support: 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal Continuous working current: 45A 60A Power supply voltage: 3-6S (12-26V) Moutning Pattern: 30.5x30.5MM Firmware: BLHELI 32 ESC 5V BEC output: NO Aperture: 4MM Weight: 14.6g Includes 1x SkyStarsRC Fly Stack F7 HD Pro 3 3-6S 30x30 Stack/C
