racedayquadsSKYSTARSRC· Motor control
SkyStarsRC Fly Stack F7 HD Pro3 3-6S 30x30 Stack/Combo (F722 FC / KM60 32Bit 60A 4in1 ESC)
Manufacturer part no. SKYS-SKY-150710
Manufacturer part no. SKYS-SKY-150710
Listed by racedayquads at €121.68. Delivered to France, including shipping, VAT and any customs duty, it comes to about €164.02. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €121.68 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €27.34 |
| Total delivered | €164.02 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 60 A |
| Weight | 73 g |
The SkyStars Fly Stack features an F722 HD Pro 3 flight controller and a KM60 60A BLHeli_32 4-in-1 128K ESC with a 30x30 mounting pattern! Check out our other 30x30 Stacks, and our SkyStarsRC collection! Features The ESC has an onboard filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components. Built-in inverter, which can actually be installed in any spare UART. EMI Shell provides a stronger anti-interference capability. DJI FPV OSD is supported by any spare UART VTX 10V/Vbat filtered power ON/OFF switch Flight control onboard voltage sensor F722 HD Pro 3 Flight Controller 30x30 Mounting Pattern KM60 60A 128K ESC 3-6S LiPo Support Specifications SkyStarsRC F7HD Pro3 FC MCU: STM32F722RGT6 216MHz Gyroscope: BMI270 Baro: Bmp280 OSD: Betaflight SPI OSD DJI HD OSD(UART6) Black box: 16MB 6x Uarts: UART 1/2/3/4/5/6 4x PWM outputs 1x I2C 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) USB Type-C(USB2.0) 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr) 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V) VTX 10V/Vbat filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART LED: 4 LED independent pads, support WS2812 programming lamp output. Receiver: Support Sbus, CRSF, IBUS, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART. KM60 60A 4in1 ESC Input voltage: 3-6S LiPo Con. Current: 60A Peak Current: 70A≥ 10S Firmware: BLHeli_32 Support: Dshot 600/1200 Mounting pattern: 30.5mm/M3 BEC: No Product size: 41x46x7.6mm Weight: 17g about Includes 1x SkyStarsRC Fly Stack F7 HD Pro3 3-6S 30x30 Stack/Combo (F722 FC / KM60 32Bit 60A 4in1 ESC) 4x Damping Rubbers (M3x3.5mm) 1x XT60 connector and wires 2x 8pin wiring harness (1x 70mm,1x 50mm) 1x 35v 560uf Capacitor
