MÄDLERMÄDLER· Sprockets, Chains, Accessories
Chain tensioner SPANN-BOY® TS up to 06 B-1
Manufacturer part no. 14040801
$125.94≈ 109.37 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €109.37 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €24.87 |
| Total delivered | €149.24 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 460 g |
Other characteristics
| Distance to middle of chain sliding surface for | 10 mm |
| Number of strands | 1 |
| Total width of sliding element | 20 mm |
| Din iso no | Up to 06 B-1 |
| Material | Plastic (PE-UHMW) / Steel |
| Pitch | 3/8 x 7/32″ |
| Surface | Zinc-plated. varnished |
| Tensioning force | 33-190 N |
Description
Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW. These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives. Needed space below chain only 40mm. With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces. Usable travel about 40mm. Interchangeable with similar parts of other suppliers. Temperature range: -20°C to +60°C (short time up to +80°C).
Similar products
MÄDLERIn stock
Chain wheel, 8 teeth made of cast iron 20 DIN 766 outer diameter 170mm, for diameter 10 mm
€160.06$184.31
View at seller ↗MÄDLERIn stock
Chain wheel, 5 teeth made of cast iron 20 DIN 766 outer diameter 115mm, for diameter 10 mm
€105.11$121.03
View at seller ↗MÄDLERIn stock
Chain wheel, 24 teeth made of cast iron 20 DIN 766 outer diameter 390mm, for diameter 8 mm
€385.42$443.81
View at seller ↗MÄDLERIn stock
Chain wheel , 18 teeth made of cast iron 20 DIN 766 outer diameter 305mm, for diameter 8 mm
€347.34$399.96
View at seller ↗