MÄDLERMÄDLER· Cables & connectors
Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €56.78. Delivered to France, including shipping, VAT and any customs duty, it comes to about €86.14. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €56.78 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.36 |
| Total delivered | €86.14 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 2.45 kg |
| Diameter of mouning area | 110 mm |
| Flange width da | 7.5 mm |
| For clamp bushing | 1 615 |
| Hole circle diameter of mounting holes | 150 mm |
| Hole diameter | 7.5 mm |
| Hub diameter | 85 mm |
| Hub width | 15.3 mm |
| Outer diameter | 200 mm |
| Quantity of holes | 6 mm |
| Total length | 38 mm |
| Width of assembling surface | 2.5 mm |
| Angular distance per each hole | 60° ° |
| Material | Grey cast iron (A48) |
Material: Grey cast iron GG25. Product no. 14090147 from steel. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Semantically close products available for less — check the specs match your need.
| Surface | Blank |