

Manufacturer part no. 16490001
Listed by MÄDLER at €111.68. Delivered to France, including shipping, VAT and any customs duty, it comes to about €152.02. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €111.68 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €25.34 |
| Total delivered | €152.02 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Admissible pulling force | 7 800 N |
| Angle x3b2 | 40 ° |
| Belt width | 100 mm |
| Matching clamping plate | 16 499 901 |
| Roller length max. | 100 m |
| Strap height | 2 mm |
| Tooth height | 2.5 mm |
| Material | Polyurethane (TPU) with steel cord |
| Profile | T10 |
| Surface | PAZ-coated (tooth side) |
| Weight | 480 g/m |
Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. 1 Unit = 1 Meter = 39.37 Inches
Semantically close products available for less — check the specs match your need.





