PololuPololu· Motor control
DRV8825 Stepper Motor Driver Carrier, High Current
Manufacturer part no. 2133
$15.95≈ 14.02 €
Price summary
Listed by Pololu at €14.02. Delivered to France, including shipping, VAT and any customs duty, it comes to about €46.82. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 197 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €14.02 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €7.80 |
| Total delivered | €46.82 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $15.95 | |
| ≥ 5 | $14.67 | −8 % |
| ≥ 25 | $13.50 | −15 % |
Datasheets & documents
- 📄 DRV8824/DRV8825 stepper motor driver carrier schematic diagram
- 📄 Dimension diagram of the DRV8825 Stepper Motor Driver Carrier, High Current
- 📄 3D model of the DRV8825 Stepper Motor Driver Carrier, High Current
- 📄 Drill guide for the DRV8824/DRV8825 Stepper Motor Driver Carrier
- 📄 Texas Instruments DRV8825 stepper motor driver datasheet
- 📄 Video: setting the current limit on Pololu stepper motor driver carriers
- 📄 Texas Instruments DRV8825 product page
- 📄 Arduino library for A4988, DRV8825, DRV8834, DRV8880, and TB67S581FNG
- 📄 Introducing the Tic T825 USB Multi-Interface Stepper Motor Controller
- 📄 Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
Specifications (automatically extracted)
Electrical
| Voltage max. | 45 V |
| Voltage min. | 8.2 V |
Mechanical
| Weight | 1.6 g |
Other characteristics
| Continuous current per phase | 1.5 A |
| Maximum current per phase | 2.2 A |
| Maximum logic voltage | 5.25 V |
| Minimum logic voltage | 2.5 V |
| Bulk packaged | No |
| Header pins soldered | No |
| Microstep resolutions | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
| Other pcb markings | blank white box |
| Pcb dev codes | md20b |
| Reverse voltage protection | No |
Description
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
