PololuPololu· Electronics
DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit
Manufacturer part no. 3766
$13.95≈ 12.11 €
In stock — 272 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €12.11 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €7.42 |
| Total delivered | €44.53 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $13.95 | |
| ≥ 5 | $12.83 | −8 % |
| ≥ 25 | $11.81 | −15 % |
| ≥ 100 | $10.86 | −22 % |
Datasheets & documents
- 📄 Schematic diagram for the DRV8434S SPI Stepper Motor Driver Carrier
- 📄 Dimension diagram of the DRV8434x Stepper Motor Driver Carriers
- 📄 Drill guides (DXF) for the DRV8434x Stepper Motor Driver Carriers
- 📄 3D models (STEP) of the DRV8434x Stepper Motor Driver Carriers
- 📄 Texas Instruments DRV8434S stepper motor driver datasheet
- 📄 Video: setting the current limit on Pololu stepper motor driver carriers
- 📄 Texas Instruments product page for the DRV8434S stepper motor driver
- 📄 Arduino library for the Pololu DRV8434S SPI stepper motor driver carrier
- 📄 New products: DRV8434A and DRV8434S stepper motor driver carriers
Specifications (automatically extracted)
Electrical
| Voltage max. | 48 V |
| Voltage min. | 4.5 V |
Mechanical
| Weight | 1.3 g |
Other characteristics
| Continuous current per phase | 1.2 A |
| Maximum current per phase | 2 A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 1.8 V |
| Current limit control | potentiometer for max with SPI scaling |
| Header pins soldered | No |
| Microstep resolutions | full with 100% current, full with 70% current, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 |
| Other pcb markings | 0J13692 |
| Pcb dev codes | md43b |
| Reverse voltage protection |
Description
This breakout board for TI’s DRV8434S microstepping bipolar stepper motor driver operates from 4.5 V to 48 V and can deliver up to approximately 1.2 A continuous per phase without a heat sink or forced air flow (2 A peak). The SPI interface allows configuration of the current limit, step mode (11 step modes from full-step through 1/256-step), decay mode, and stall detection. The driver also features built-in protection against under-voltage, over-current, and over-temperature conditions. This version of the board uses an on-board potentiometer for setting the maximum current limit, and SPI can be used to set the actual current limit to intermediate values in increments of the set maximum/16.
Similar products
PololuIn stock
ACS37200LLXTR-200B5 Current Sensor Large Carrier -200A to +200A, 5V
€21.67$24.95
View at seller ↗PololuIn stock
ACS37200LLXTR-150B5 Current Sensor Large Carrier -150A to +150A, 5V
€21.67$24.95
View at seller ↗PololuIn stock
ACS37200LLXTR-100B5 Current Sensor Large Carrier -100A to +100A, 5V
€21.67$24.95
View at seller ↗
PololuIn stock
ACS37200LLXTR-200B3 Current Sensor Large Carrier -200A to +200A, 3.3V
€21.67$24.95
View at seller ↗