PololuPololu· 16-pin Stepper Motor Drivers
DRV8834 Low-Voltage Stepper Motor Driver Carrier
Manufacturer part no. 2134
$9.95≈ 8.64 €
In stock — 604 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €8.64 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €6.73 |
| Total delivered | €40.37 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $9.95 | |
| ≥ 5 | $9.15 | −8 % |
| ≥ 25 | $8.42 | −15 % |
| ≥ 100 | $7.75 | −22 % |
Datasheets & documents
- 📄 DRV8834 low-voltage stepper motor driver carrier schematic diagram
- 📄 Dimension diagram of the DRV8834 Low-Voltage Stepper Motor Driver Carrier
- 📄 3D model of the DRV8834 Low-Voltage Stepper Motor Driver Carrier
- 📄 Drill guide for DRV8834 Low-Voltage Stepper Motor Driver Carrier
- 📄 Texas Instruments DRV8834 stepper motor driver datasheet
- 📄 Video: setting the current limit on Pololu stepper motor driver carriers
- 📄 Texas Instruments DRV8834 product page
- 📄 Arduino library for A4988, DRV8825, DRV8834, DRV8880, and TB67S581FNG
- 📄 Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
Specifications (automatically extracted)
Electrical
| Voltage max. | 10.8 V |
| Voltage min. | 2.5 V |
Mechanical
| Weight | 1.6 g |
Other characteristics
| Continuous current per phase | 1.5 A |
| Maximum current per phase | 2 A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 2.5 V |
| Header pins soldered | No |
| Microstep resolutions | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
| Other pcb markings | 0J7097 |
| Pcb dev codes | md22a |
| Reverse voltage protection | No |
| Size | 0.6″ × 0.8″ |
Description
This is a breakout board for TI’s DRV8834 microstepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8834 operates from 2.5–10.8 V, allowing stepper motors to be powered with voltages that are too low for other drivers, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). This board ships with 0.1″ male header pins included but not soldered in.
Similar products
PololuIn stock
DRV8834 Low-Voltage Stepper Motor Driver Carrier (Header Pins Soldered)
€9.51$10.95
View at seller ↗
PololuBackorder
A4988 Stepper Motor Driver Carrier, Black Edition (Bulk, Header Pins Soldered)
€8.75$10.07
View at seller ↗
PololuBackorder
A4988 Stepper Motor Driver Carrier (Bulk, Header Pins Soldered)
€7.95$9.15
View at seller ↗
