
Manufacturer part no. 3097
| Item | €12.98 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €7.60 |
| Total delivered | €45.58 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $14.95 | |
| ≥ 5 | $13.75 | −8 % |
| ≥ 25 | $12.65 | −15 % |
| ≥ 100 | $11.64 | −22 % |
| Voltage max. | 47 V |
| Voltage min. | 10 V |
| Weight | 2.6 g |
| Continuous current per phase | 1.6 A |
| Maximum current per phase | 4.5 A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 2 V |
| Current limit control | potentiometer |
| Header pins soldered | Yes |
| Microstep resolutions | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Motor driver | TB67S249FTG |
| Other pcb markings | 0J11687 |
| Pcb dev codes | md34a |
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak). Please see the TB67S249FTG Stepper Motor Driver Compact Carrier product page for more information about the driver.




| Reverse voltage protection | No |
| Size | 0.6″ × 0.8″ |