
Manufacturer part no. 5249
Listed by Pololu at €15.56. Delivered to France, including shipping, VAT and any customs duty, it comes to about €48.67. Prices last checked on 2026-08-09.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €15.56 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €8.11 |
| Total delivered | €48.67 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $17.95 | |
| ≥ 5 | $16.51 | −8 % |
| ≥ 25 | $15.19 | −15 % |
| ≥ 100 | $13.98 | −22 % |
| Voltage max. | 34 V |
| Voltage min. | 4.5 V |
| Weight | 4.7 g |
| Continuous current per phase | 1.2 A |
| Maximum current per phase | 2 A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 2 V |
| Current limit control | potentiometer |
| Header pins soldered | No |
| Microstep resolutions | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Motor driver | TB67S579FTG |
| Other pcb markings | 0J16260 |
| Pcb dev codes | md53b |
This breakout board for Toshiba’s TB67S579FTG microstepping bipolar stepper motor driver provides access to all of the driver’s pins, enabling use of its many features, including advanced dynamic mixed decay (ADMD), automatic gain control (AGC), and automatic wave generation system (AWGS). The TB67S579FTG has a wide operating voltage range of 4.5 V to 34 V, and our carrier board can deliver approximately 1.2 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features built-in protection against over-current and over-temperature conditions.
Semantically close products available for less — check the specs match your need.


| Reverse voltage protection | Yes |
| Size | 0.9″ × 2.05″ |