Name: MP6602 Stepper Motor Driver Carrier
Brand: Pololu
Price: 14.95 USD
Availability: InStock

Specifications (automatically extracted)

Electrical

Voltage max.	35 V
Voltage min.	4.5 V

Mechanical

Weight

1.3 g

Other characteristics

Continuous current per phase	4 A
Maximum current per phase	4 A
Maximum logic voltage	5.5 V
Minimum logic voltage	3 V
Current limit control	SPI
Header pins soldered	No
Microstep resolutions	full with 70% current, 1/2, 1/4, 1/8, 1/16, 1/32
Other pcb markings	0J16036
Pcb dev codes	md52a
Reverse voltage protection	No

Description

This is a breakout board for the MPS MP6602 microstepping bipolar/unipolar stepper motor driver, which features a serial interface and stall detection. It operates from 4.5 V to 35 V with a maximum current limit of 4 A, which it can run at continuously on our carrier board without a heat sink or forced air flow. The SPI interface allows configuration of the current limit, step mode (6 step modes from full-step through 1/32-step), decay mode off time, and stall detection, and it can also be used for stepper motor control. The driver also features built-in protection against under-voltage, over-current, and over-temperature conditions. This version does not include header pins.