Bevel gear made of polyketone die-cast module 1 60 teeth i=5:1 bore 10mm

MÄDLERMÄDLER· Mechanics & transmission

Bevel gear made of polyketone die-cast module 1 60 teeth i=5:1 bore 10mm

Name: Bevel gear made of polyketone die-cast module 1 60 teeth i=5:1 bore 10mm
Brand: MÄDLER
Price: 8.42 USD
Availability: BackOrder

Manufacturer part no. 35559901

$8.42≈ 7.30 €

Price summary

Listed by MÄDLER at €7.30. Delivered to France, including shipping, VAT and any customs duty, it comes to about €26.76. Prices last checked on 2026-08-07.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

On backorderlead time 14 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€7.30
Shipping	€15.00
VAT (20%)	€4.46
Total delivered	€26.76

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Mechanical

Weight

17.9 g

Other characteristics

Max torque	63 Ncm
Module	1
No of teeth	60
Optional counter wheel part no	35 559 801
Outer diameter	60.4 mm
Material	Plastic die-cast (Polyketone, up to 140°C)
Ratio	5:1 (12/60)
Surface	Blank

Description

Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.