Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm

MÄDLERMÄDLER· Mechanics & transmission

Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm

Name: Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm
Brand: MÄDLER
Price: 2.58 USD
Availability: InStock

Manufacturer part no. 35575600

$2.58≈ 2.23 €

Price summary

Listed by MÄDLER at €2.23. Delivered to France, including shipping, VAT and any customs duty, it comes to about €20.68. Prices last checked on 2026-08-05.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

In stock — 10 unitslead time 14 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€2.23
Shipping	€15.00
VAT (20%)	€3.45
Total delivered	€20.68

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Mechanical

Weight

7.5 g

Other characteristics

Max torque	43 Ncm
Module	1.5
No of teeth	15
Optional counter wheel part no	35 575 700
Outer diameter	25.4 mm
Material	Plastic die-cast (Polyacetal, up to 80°C)
Ratio	2:1 (30/15)
Surface	Blank

Description

Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.