Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm vs Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm
Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm and Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm is €1.39 cheaper ($2.58).
| Criterion |  Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm | Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm |
|---|---|---|
| Price | $4.19 | $2.58cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 6 g | 7.5 g |
| Material | Plastic die-cast (Polyacetal, up to 80°C) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 58 Ncm | 43 Ncm |
| Module | 1 | 1.5 |
| No of teeth | 30 | 15 |
| Optional counter wheel part no | 35 552 000 | 35 575 700 |
| Outer diameter | 31.4 mm | 25.4 mm |
| Ratio | 1:1 (30/30) | 2:1 (30/15) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.