MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 1 19 teeth i=1:1 milled
Manufacturer part no. 36051000
Manufacturer part no. 36051000
Listed by MÄDLER at €15.09. Delivered to France, including shipping, VAT and any customs duty, it comes to about €36.11. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €15.09 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.02 |
| Total delivered | €36.11 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 14 g |
| Bore | 5 mm |
| Max torque | 0.085 Nm |
| Module | 1 |
| No of teeth | 19 |
| Optional counter wheel part no | 36 051 000 |
| Outer diameter | 20.4 mm |
| Tooth quality | 8 |
| Material | Steel (12L13) |
| Ratio | 1:1 (19/19) |
| Surface | Blank |
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Semantically close products available for less — check the specs match your need.