MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 1 30 teeth i=1:1 milled
Manufacturer part no. 36052000
Manufacturer part no. 36052000
Listed by MÄDLER at €22.45. Delivered to France, including shipping, VAT and any customs duty, it comes to about €44.94. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €22.45 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.49 |
| Total delivered | €44.94 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 50 g |
| Bore | 5 mm |
| Max torque | 0.29 Nm |
| Module | 1 |
| No of teeth | 30 |
| Optional counter wheel part no | 36 052 000 |
| Outer diameter | 31.4 mm |
| Tooth quality | 8 |
| Material | Steel (12L13) |
| Ratio | 1:1 (30/30) |
| Surface | Blank |
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Semantically close products available for less — check the specs match your need.