MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 1.5 30 teeth i=1:1 milled
Manufacturer part no. 36072000
$44.31≈ 39.47 €
Price summary
Listed by MÄDLER at €39.47. Delivered to France, including shipping, VAT and any customs duty, it comes to about €65.36. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 4 unitslead time 14 d
Estimated landed cost
| Item | €39.47 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.89 |
| Total delivered | €65.36 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 135 g |
Other characteristics
| Bore | 10 mm |
| Max torque | 1.01 Nm |
| Module | 1.5 |
| No of teeth | 30 |
| Optional counter wheel part no | 36 072 000 |
| Outer diameter | 47.1 mm |
| Tooth quality | 8 |
| Material | Steel (12L13) |
| Ratio | 1:1 (30/30) |
| Surface | Blank |
Description
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.