MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 2.5 30 teeth i=1:1 milled
Manufacturer part no. 36112000
$72.57≈ 64.65 €
Price summary
Listed by MÄDLER at €64.65. Delivered to France, including shipping, VAT and any customs duty, it comes to about €95.58. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €64.65 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €15.93 |
| Total delivered | €95.58 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Price history
2 price/stock records since 8/4/2026
Specifications (automatically extracted)
Mechanical
| Weight | 560 g |
Other characteristics
| Bore | 15 mm |
| Max torque | 16.3 Nm |
| Module | 2.5 |
| No of teeth | 30 |
| Optional counter wheel part no | 36 112 000 |
| Outer diameter | 78.7 mm |
| Tooth quality | 8 |
| Material | Steel (1045) |
| Ratio | 1:1 (30/30) |
| Surface | Blank |
Description
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
