MÄDLERMÄDLER· Bevel Gears, Worm Wheels, Worms
Bevel gear made of steel module 1.5 20 teeth i=1:1 milled
Manufacturer part no. 36071100
$22.42≈ 19.47 €
In stock — 2 unitslead time 14 d
Estimated landed cost
| Item | €19.47 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.89 |
| Total delivered | €41.36 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 47 g |
Other characteristics
| Bore | 8 mm |
| Max torque | 0.34 Nm |
| Module | 1.5 |
| No of teeth | 20 |
| Optional counter wheel part no | 36 071 100 |
| Outer diameter | 32.1 mm |
| Tooth quality | 8 |
| Material | Steel (12L13) |
| Ratio | 1:1 (20/20) |
| Surface | Blank |
Description
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Similar products
MÄDLERIn stock
Bevel gear set spiral toothed module 3.5, number of teeth 9/27 i=3 :1 material steel 16MnCr5 teeth hardened
€987.71$1137.35
View at seller ↗
MÄDLERIn stock
Bevel gear set spiral toothed module 3.6 number of teeth 9/23 i=2.555..:1 material steel 16MnCr5 teeth hardened
€1111.78$1280.22
View at seller ↗MÄDLERIn stock
Bevel gear set spiral toothed module 3 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened
€771.12$887.95
View at seller ↗
MÄDLERIn stock
Bevel gear set spiral toothed module 3 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened
€705.58$812.47
View at seller ↗