MÄDLERMÄDLER· Bevel Gears, Worm Wheels, Worms
Bevel gear made of steel module 2 15 teeth i=4:1 milled
Manufacturer part no. 36109200
$63.92≈ 55.51 €
In stock — 2 unitslead time 14 d
Estimated landed cost
| Item | €55.51 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.10 |
| Total delivered | €84.61 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 80 g |
Other characteristics
| Bore | 10 mm |
| Max torque | 1.02 Nm |
| Module | 2 |
| No of teeth | 15 |
| Optional counter wheel part no | 36 109 300 |
| Outer diameter | 34 mm |
| Tooth quality | 8 |
| Material | Steel (12L13) |
| Ratio | 4:1 (15/60) |
| Surface | Blank |
Description
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Similar products
MÄDLERIn stock
Bevel gear set spiral toothed module 3.5, number of teeth 9/27 i=3 :1 material steel 16MnCr5 teeth hardened
€987.71$1137.35
View at seller ↗
MÄDLERIn stock
Bevel gear set spiral toothed module 3.6 number of teeth 9/23 i=2.555..:1 material steel 16MnCr5 teeth hardened
€1111.78$1280.22
View at seller ↗MÄDLERIn stock
Bevel gear set spiral toothed module 3 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened
€771.12$887.95
View at seller ↗
MÄDLERIn stock
Bevel gear set spiral toothed module 3 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened
€705.58$812.47
View at seller ↗